Features

• Sublimate onto untreated substrates such as wood stone and ceramics
  
• Sublimate onto dark or black substrates
  
• Sublimate onto tempered glass
  
• Protect substrates against UV degradation

Clear

Designed to enable the transfer of an image to any substrate using sublimation inks.Digi Coat clear is primarily aimed at light coloured hard and soft substrates.

In order to transfer an image to any product or surface using sublimation ink, that product or surface must be “sublimation receptive”.

This is not a problem when using specialty sublimation substrates but natural and untreated surfaces like wood, metal, ceramic, leather, stone, glass and other items pose a real challenge to the digital decorator.

To accept a sublimation transfer, these products must be treated with a polymer coating that when cured allows the sublimation inks to transfer onto the product. Digi Coat Clear was created for just this challenge. It is a simple-to-use; clear base coating that allows you to create your own range of unique and normally unprintable sublimation consumables.

The coating cures at 160 degrees for 15-20 minutes.

How to use this product

• Shake can well for 1 minute
  
• Ensure the surface to be coated is clean dry and free from grease
  
• For best results apply Digi Coat in an even motion holding the can approx 250mm (10") from surface using light passes at room temperature. Using multiple passes for a high gloss finish
  
• Allow to air dry for 10 minutes and then cure in oven at 160°C (320°F) for 15-20 minutes

White

Designed to be used in conjunction with Digi Coat Clear, enabling stunning quality sublimation printing on glass. It permits sublimation ink to pass through the white coating to sit above it, producing strong vibrant images..

Decorating glass products like tiles or cutting boards with sublimation inks can produce stunning images. Sublimated images must however be applied to the back of the glass. The results of the final image cam be disappointing and appear washed out and faded unless the transfer is top coated with a finish.Digi Coat Translucent White provides a solution. It is a specially developed to enable the sublimation image to transfer straight through and to fix itself in the clear coating below and resulting in a vibrant image. No more washed out images on glass! This coating is applied as an overcoat to Digi Coat Clear and cures at 160 degrees for 15-20 minutes.

How to use this product

• Shake can well for 1 minute
  
• Ensure the surface to be coated is clean dry and free from grease
  
• Prime surface with adhesion promoter
  
• Coat glass first with Digi Coat Clear (allow to air dry for 5 mins) then apply Translucent White over clear coating. Only a fine coat is required. For best results apply at room temperature from a distance of around 250mm (10")
  
• Cure in oven at 160°C (320°F) for 15-20 mins

UV Protect

Designed to be used in conjunction with Digi Coat Clear, enabling stunning quality sublimation printing on glass. It permits sublimation ink to pass through the white coating to sit above it, producing strong vibrant images..

Decorating glass products like tiles or cutting boards with sublimation inks can produce stunning images. Sublimated images must however be applied to the back of the glass. The results of the final image cam be disappointing and appear washed out and faded unless the transfer is top coated with a finish.Digi Coat Translucent White provides a solution. It is a specially developed to enable the sublimation image to transfer straight through and to fix itself in the clear coating below and resulting in a vibrant image. No more washed out images on glass! This coating is applied as an overcoat to Digi Coat Clear and cures at 160 degrees for 15-20 minutes.

How to use this product

• Shake can well for 1 minute
  
• Ensure the surface to be coated is clean dry and free from grease
  
• Prime surface with adhesion promoter
  
• Coat glass first with Digi Coat Clear (allow to air dry for 5 mins) then apply Translucent White over clear coating. Only a fine coat is required. For best results apply at room temperature from a distance of around 250mm (10")
  
• Cure in oven at 160°C (320°F) for 15-20 mins

Opaque White

Designed to be used in conjunction with Digi Coat Clear, enabling stunning quality sublimation printing on glass. It permits sublimation ink to pass through the white coating to sit above it, producing strong vibrant images..

Decorating glass products like tiles or cutting boards with sublimation inks can produce stunning images. Sublimated images must however be applied to the back of the glass. The results of the final image cam be disappointing and appear washed out and faded unless the transfer is top coated with a finish.Digi Coat Translucent White provides a solution. It is a specially developed to enable the sublimation image to transfer straight through and to fix itself in the clear coating below and resulting in a vibrant image. No more washed out images on glass! This coating is applied as an overcoat to Digi Coat Clear and cures at 160 degrees for 15-20 minutes.

How to use this product

• Shake can well for 1 minute
  
• Ensure the surface to be coated is clean dry and free from grease
  
• Prime surface with adhesion promoter
  
• Coat glass first with Digi Coat Clear (allow to air dry for 5 mins) then apply Translucent White over clear coating. Only a fine coat is required. For best results apply at room temperature from a distance of around 250mm (10")
  
• Cure in oven at 160°C (320°F) for 15-20 mins

Adhesion

Designed to be used in conjunction with Digi Coat Clear, enabling stunning quality sublimation printing on glass. It permits sublimation ink to pass through the white coating to sit above it, producing strong vibrant images..

Decorating glass products like tiles or cutting boards with sublimation inks can produce stunning images. Sublimated images must however be applied to the back of the glass. The results of the final image cam be disappointing and appear washed out and faded unless the transfer is top coated with a finish.Digi Coat Translucent White provides a solution. It is a specially developed to enable the sublimation image to transfer straight through and to fix itself in the clear coating below and resulting in a vibrant image. No more washed out images on glass! This coating is applied as an overcoat to Digi Coat Clear and cures at 160 degrees for 15-20 minutes.

How to use this product

• Shake can well for 1 minute
  
• Ensure the surface to be coated is clean dry and free from grease
  
• Prime surface with adhesion promoter
  
• Coat glass first with Digi Coat Clear (allow to air dry for 5 mins) then apply Translucent White over clear coating. Only a fine coat is required. For best results apply at room temperature from a distance of around 250mm (10")
  
• Cure in oven at 160°C (320°F) for 15-20 mins

Watch the videos & get even more out of Digi-Coat.

	Digicoat Overview Click here to view the video.
	Digi-Coat on glass Click here to view the video
	Digi-Coat on wood Click here to view the video
	Digi-Coat on metal Click here to view the video
	Digi-Coat on ceramics Click here to view the video

Coming Soon!!

Features

Coming Soon!!

Features

Coming Soon!!

Features

Coming Soon!!